ompl::geometric::AnytimePathShortening Class Reference

#include <ompl/geometric/planners/AnytimePathShortening.h>

Inheritance diagram for ompl::geometric::AnytimePathShortening:

## Public Member Functions

AnytimePathShortening (const base::SpaceInformationPtr &si)
Constructor requires the space information to plan in.

~AnytimePathShortening () override
Destructor.

Adds the given planner to the set of planners used to compute candidate paths.

void setProblemDefinition (const base::ProblemDefinitionPtr &pdef) override
Set the problem definition for the planners. The problem needs to be set before calling solve(). Note: If this problem definition replaces a previous one, it may also be necessary to call clear().

base::PlannerStatus solve (const base::PlannerTerminationCondition &ptc) override
Method that solves the motion planning problem. This method terminates under just two conditions, the given argument condition, or when the maximum path length in the optimization objective is met. More...

void clear () override
Clear all internal planning datastructures. Planner settings are not affected. Subsequent calls to solve() will ignore all previous work.

void getPlannerData (base::PlannerData &data) const override
Get information about the most recent run of the motion planner. More...

virtual void getPlannerData (ompl::base::PlannerData &data, unsigned int idx) const
Get information about the most recent run of the idxth motion planner.

void setup () override
Perform any necessary configuration steps. This method also invokes ompl::base::SpaceInformation::setup() if needed. This must be called before solving.

void checkValidity () override
Check to see if the planners are in a working state (setup has been called, a goal was set, the input states seem to be in order). In case of error, this function throws an exception.

unsigned int getNumPlanners () const
Retrieve the number of planners added.

base::PlannerPtr getPlanner (unsigned int idx) const
Retrieve a pointer to the ith planner instance.

bool isShortcutting () const
Return whether the anytime planner will perform shortcutting on paths.

void setShortcut (bool shortcut)
Enable/disable shortcutting on paths.

bool isHybridizing () const
Return whether the anytime planner will extract a hybrid path from the set of solution paths.

void setHybridize (bool hybridize)
Enable/disable path hybridization on the set of solution paths.

unsigned int maxHybridizationPaths () const
Return the maximum number of paths that will be hybridized.

void setMaxHybridizationPath (unsigned int maxPathCount)
Set the maximum number of paths that will be hybridized.

void setDefaultNumPlanners (unsigned int numPlanners)
Set default number of planners to use if none are specified.

unsigned int getDefaultNumPlanners () const
Get default number of planners used if none are specified.

std::string getBestCost () const
Return best cost found so far by algorithm.

Public Member Functions inherited from ompl::base::Planner
Planner (const Planner &)=delete

Planneroperator= (const Planner &)=delete

Planner (SpaceInformationPtr si, std::string name)
Constructor.

virtual ~Planner ()=default
Destructor.

template<class T >
T * as ()
Cast this instance to a desired type. More...

template<class T >
const T * as () const
Cast this instance to a desired type. More...

const SpaceInformationPtrgetSpaceInformation () const
Get the space information this planner is using.

const ProblemDefinitionPtrgetProblemDefinition () const
Get the problem definition the planner is trying to solve.

const PlannerInputStatesgetPlannerInputStates () const
Get the planner input states.

PlannerStatus solve (const PlannerTerminationConditionFn &ptc, double checkInterval)
Same as above except the termination condition is only evaluated at a specified interval.

PlannerStatus solve (double solveTime)
Same as above except the termination condition is solely a time limit: the number of seconds the algorithm is allowed to spend planning.

const std::string & getName () const
Get the name of the planner.

void setName (const std::string &name)
Set the name of the planner.

const PlannerSpecsgetSpecs () const
Return the specifications (capabilities of this planner)

bool isSetup () const
Check if setup() was called for this planner.

ParamSetparams ()
Get the parameters for this planner.

const ParamSetparams () const
Get the parameters for this planner.

const PlannerProgressPropertiesgetPlannerProgressProperties () const
Retrieve a planner's planner progress property map.

virtual void printProperties (std::ostream &out) const
Print properties of the motion planner.

virtual void printSettings (std::ostream &out) const
Print information about the motion planner's settings.

## Protected Member Functions

virtual void threadSolve (base::Planner *planner, const base::PlannerTerminationCondition &ptc)
The function that the planning threads execute when solving a motion planning problem.

Protected Member Functions inherited from ompl::base::Planner
template<typename T , typename PlannerType , typename SetterType , typename GetterType >
void declareParam (const std::string &name, const PlannerType &planner, const SetterType &setter, const GetterType &getter, const std::string &rangeSuggestion="")
This function declares a parameter for this planner instance, and specifies the setter and getter functions.

template<typename T , typename PlannerType , typename SetterType >
void declareParam (const std::string &name, const PlannerType &planner, const SetterType &setter, const std::string &rangeSuggestion="")
This function declares a parameter for this planner instance, and specifies the setter function.

void addPlannerProgressProperty (const std::string &progressPropertyName, const PlannerProgressProperty &prop)
Add a planner progress property called progressPropertyName with a property querying function prop to this planner's progress property map.

## Protected Attributes

std::vector< base::PlannerPtrplanners_
The list of planners used for solving the problem.

bool shortcut_ {true}
Flag indicating whether to shortcut paths.

bool hybridize_ {true}
Flag indicating whether to hybridize the set of solution paths.

unsigned int maxHybridPaths_ {24}
The maximum number of paths that will be hybridized. This prohibits hybridization of a very large path set, which may take significant time.

unsigned int defaultNumPlanners_
The number of planners to use if none are specified. This defaults to the number of cores. This parameter has no effect if planners have already been added.

Protected Attributes inherited from ompl::base::Planner
SpaceInformationPtr si_
The space information for which planning is done.

ProblemDefinitionPtr pdef_
The user set problem definition.

PlannerInputStates pis_
Utility class to extract valid input states.

std::string name_
The name of this planner.

PlannerSpecs specs_
The specifications of the planner (its capabilities)

ParamSet params_
A map from parameter names to parameter instances for this planner. This field is populated by the declareParam() function.

PlannerProgressProperties plannerProgressProperties_
A mapping between this planner's progress property names and the functions used for querying those progress properties.

bool setup_
Flag indicating whether setup() has been called.

Public Types inherited from ompl::base::Planner
typedef std::function< std::string()> PlannerProgressProperty
Definition of a function which returns a property about the planner's progress that can be queried by a benchmarking routine.

typedef std::map< std::string, PlannerProgressPropertyPlannerProgressProperties
A dictionary which maps the name of a progress property to the function to be used for querying that property.

## Detailed Description

Short description
Anytime path shortening is a generic wrapper around one or more geometric motion planners that repeatedly applies shortcutting (ompl::geometric::PathSimplifier) and hybridization (ompl::geometric::PathHybridization) to a set of solution paths with the goal of rapidly converging to a solution with minimal length. Any number and combination of planners can be specified, each is run in a separate thread. A path length objective may be set, otherwise the tool will run until the termination condition is met. The purpose of this tool is to add anytime properties to motion planners that are not typically viewed as optimal/optimizing algorithms.
External documentation
R. Luna, I.A. Şucan, M. Moll, and L.E. Kavraki, Anytime Solution Optimization for Sampling-Based Motion Planning, in Proc. 2013 IEEE Intl. Conf. on Robotics and Automation, pp. 5053-5059, May. 2013. DOI: ICRA.2013.6631301
[PDF]

Definition at line 67 of file AnytimePathShortening.h.

## ◆ getPlannerData()

 void ompl::geometric::AnytimePathShortening::getPlannerData ( base::PlannerData & data ) const
overridevirtual

Get information about the most recent run of the motion planner.

Remarks
This call is ambiguous in this tool. By default, the planner data for the first planner in the planner list is returned.

Reimplemented from ompl::base::Planner.

Definition at line 209 of file AnytimePathShortening.cpp.

## ◆ solve()

 ompl::base::PlannerStatus ompl::geometric::AnytimePathShortening::solve ( const base::PlannerTerminationCondition & ptc )
overridevirtual

Method that solves the motion planning problem. This method terminates under just two conditions, the given argument condition, or when the maximum path length in the optimization objective is met.

Remarks
This method spawns a separate thread for each planner employed, and applies a series of optimization methods to the set of paths generated by each planning thread.

Implements ompl::base::Planner.

Definition at line 99 of file AnytimePathShortening.cpp.

The documentation for this class was generated from the following files: